ARAMA SONUÇLARI

Cleaning saves time and money. Dirty connectors cause a major percentage of fiber optic network failures. Prevention is a simple as cleaning connectors!

The One-Click Cleaner is designed to clean MPO and MTP® multi-fiber connectors used in data centers and other high density optical networks. The One-Click Cleaner MPO / One-Click Cleaner MPO-16 are revolutionary push-type cleaners which simplify cleaning of the ferrule end-face of both exposed MPO/MTP® connectors and MPO/MTP® connectors in adapters, both 12 fiber and 16 fiber (including multi-row variants). As with all One-Click Cleaners. the One-Click Cleaner MPO / MPO-16 use the innovative push-to-clean design. The mechanical push action advances the optical grade cleaning tape while effectively and gently cleaning the end-face of the connector.

Cleaning saves time and money. Dirty connectors cause a major percentage of fiber optic network failures. Prevention is a simple as cleaning connectors!

The One-Click Cleaner is an easy-to-use option for cleaning connectors on jumpers and in adapters. Simply insert the One-Click Cleaner into an adapter and push until an audible “click” is heard. The One-Click Cleaner uses the mechanical push action to advance an optical grade cleaning tape while the cleaning tip is rotated to ensure the fiber end-face is effectively, but gently cleaned. The One-Click Cleaner is a must-have for field technicians. Small enough to fit in a shirt pocket and a great addition to cleaning kits. Save your wrist – no more twist!

NEOCLEAN-E Simple-to-Use Refillable Design The NEOCLEAN-E uses a simple one push action to quickly and effectively clean contamination from the ferrule end-face of connectors on jumpers or in adapters, reducing cleaning time. It is effective for removing oil, dust, and dirt particulates that can have a negative impact on fiber optic network performance. The replaceable cleaning cartridge can perform 750 cleanings, reducing cleaning cost. Available for SC, FC, ST, E2000, LC and MU connectors with UPC or APC polishes. NEOCLEAN-M Clean MPO/MTP® Connectors with an Easy Push Operation The NEOCLEAN-M is designed to clean MPO and MTP® multi-fiber connectors used in data centers and other high density optical networks. The NEOCLEAN-M uses a one-push operation, which simplifies cleaning of the ferrule end-face of both MPO/ MTP exposed connectors and connectors in adapters. The one-push operation advances the specially designed microfiber tape while effectively and gently cleaning the end-face of the connector. NEOCLEAN-M2 The NEOCLEAN-M2 is designed to clean MPO-16 and MTP-16 multi-fiber connectors used in data centers and other high density optical networks. The NEOCLEAN-M2 uses a one-push operation, which simplifies cleaning of the ferrule end-face of both MPO-16/ MTP-16 exposed connectors and connectors in adapters. The one-push operation advances the specially designed microfiber tape while effectively and gently cleaning the end-face of the connector.

Cleaning saves time and money. Dirty connectors cause a major percentage of fiber optic network failures. Prevention is a simple as cleaning connectors!

The CLETOP optical fiber connector cleaners from AFL are rugged handheld tools for cleaning fiber optic connector end faces. The CLETOP cleaners quickly and effectively clean a variety of connectors. CLETOP cleaners are a safe cleaning option without the need for isopropyl alcohol, which is toxic and flammable. CLETOP cleaners have refillable cleaning tapes with 400 cleans per tape making them ideal for lab and field use. The simple push button shutter operation makes cleaning connectors quick and easy. The CLETOP–S Series is a second generation CLETOP cleaner offering the same CLETOP cleaning performance with “drop-in” replacement tape cartridge and ergonomic design that works equally well for left or right handed operators.

OPTIPOP-R fiber optic connector cleaners are rugged palm-sized units that offer exceptional performance field-proven by technicians over years of service. OPTIPOP-R is the preferred choice and trusted brand of communications service providers worldwide.

The CLETOP optical fiber connector cleaners from AFL are rugged handheld tools for cleaning fiber optic connector end-faces. The CLETOP cleaners quickly and effectively clean a variety of connectors. CLETOP cleaners are a safe cleaning option without the need for isopropyl alcohol, which is toxic and flammable. CLETOP cleaners have refillable cleaning tapes with 400 cleans per tape, making them ideal for lab and field use. The simple push-button shutter operation makes cleaning connectors quick and easy.

FCC2 Enhanced Fiber Connector Cleaner is a nonflammable, environmentally safe, residue-free solvent engineered to clean fiber connector end-faces and bare fiber before field terminating or fusion splicing. The 3-way dispenser is intended for easy one-handed use with fiber wipes, convenient wetting of CCT connector cleaning tips, and spray nozzle functionality. Packaged in unique, spill-proof containers, it can be shipped with connector cleaning and termination kits so technicians avoid wasting time sourcing a cleaner locally. Offering high purity and fast consistent cleaning, FCC2 was developed with and is packaged by Micro Care Corporation, a world leader in cleaning solvents.

FCC3 Debris Destroyer is a cleaning pen for fiber optic connectors and bare fiber. Use the Debris Destroyer to moisten cassette cleaners such as CLETOP-S and OPTIPOP-R, or FiberWipe™ and CleanWipe™, as well as One-Click cleaners for the wet cleaning of tough end-face contamination challenges.

Easily and safely clean contaminants from fiber connector end-faces and optical fiber before field terminating or fusion splicing. The AFL FCC2 Enhanced Formula Fiber Optic Cleaning and Preparation Fluid is a non-flammable, environmentally safe, residue free solvent engineered to easily remove contaminants from fiber optic end-faces and bare fiber. It outperforms alcohol IPA based cleaners without the health and safety risks. The AFL FCC2 is not hazardous and not regulated for all modes of transportation and shipping including air-cargo. The compact size and spill-proof design of the FCC2 3 oz. container makes it perfect for cleaning, inspection, and test equipment cases. The improved designand 3-way dispenser allows one-handed use with WFW FiberWipes, convenient wetting of CCT connector cleaning tips, and spray nozzle functionality. Offering high purity and fast, consistent cleaning, FCC2 was developed with and is packaged by MicroCare Corporation, a world leader in cleaning solvents.

The Sticklers™ brand CleanWipes™ are a convenient cleaning tool designed for high-speed cleaning of optical jumpers and patch cords. Its designs enables technicians to clean fiber optic end-faces at the lowest possible cost per clean. The exclusive, static-dissipative, high-modulus fabric cleaning material will not tear or shred away even when cleaning LC connectors. The highly absorbent material is very soft, will not scratch connectors and delivers superior cleaning results. The color-coded CleanSots™ tracks remind technicians to never re-use a wipe, eliminating cross-contamination. The box design also eliminates the chance of cleaning on an already used wipe and minimizes fingertip contamination. The CleanWipes™ system offers a simple, fast and disciplined cleaning process that delivers perfectly clean connectors. Better cleaning makes networks run faster and avoids expensive service calls.

Kimwipes are specially designed paper fiber optic cleaning wipes which can be used for cleaning laboratory equipment and instruments, camera lens, fiber optic connectors and other electronic items. These delicate task wipes have been specially designed for cleaning those surfaces where the presence of minimal lint or dust can interfere with the normal functioning of the equipment or electronic item. Kimwipes are extremely useful wherein even the slightest contamination introduced by a cleaning medium like cloth or tissue paper can lead to serious errors or abrasion to the equipment. Kimwipes are an ideal cleaning solution for laboratories and manufacturing facilities. Kimwipes have a high tensile strength which reduces tearing during cleaning yet are soft and non-abrasive. These wipes are also highly absorbent allowing them to be used for wet cleaning of fiber optic connectors with the FCC2 Fiber Optic Cleaning Fluid or as a dry cleaning solution. Use Kimwipes with the FPF1 Fiber Preparation Fluid for cleaning fibers before fusion splicing and terminating connectors.

The OPTIPOP-C cloth card cleaner uses a unique, densely woven micro fiber cloth that provides a superior connector cleaning performance. It minimizes static charge to ensure that dust and dirt particles are not instantly attracted back to the connector end-face. The card cleaner effectively removes contaminants such as oil, dust and dirt particulates that cause high insertion loss and reflectance that lead to connector damage and network failures.

Specifically designed to lift and trap common contaminants found in fiber optic installations, AFL FiberWipes provide superior cleaning results from material that is stronger and more absorbent, yet softer than traditional cellulose wipes. Packaged in a clean room, the fabric is fully optical quality grade. FiberWipes are available in rugged mini-tubs (90 wipes) or in hermetically sealed individual packages (FiberAide 1), and are the perfect size for tool kits and test kits.