Specialty Fibers
LAZERMaster™ Laser Splicing System LZM-100
Product code : 31BLX8
AFL’s LZM-100 LAZERMaster is a glass processing and splicing system that uses a CO2 laser heat source rather than electrodes, ensuring repeatable performance and low maintenance, and eliminating electrode or filament maintenance and instability. Splicing or adiabatic tapering (to create mode field adapters or pump combiners) can be performed with glass diameters of 2.3 mm or less. The high resolution optical analysis system works in conjunction with on-board firmware for fully automatic splicing, tapering and other glass shaping processes.
- CO2 laser eliminates electrode or filament maintenance, provides extremely stable operation and greatly reduces the need for periodic calibration
- Automated laser beam diameter control to fine tune the size of the heating area
- Redundant automated laser safety features
- 2.3 mm maximum fiber diameter (larger fibers may be spliced manually)
Specification Sheet
SS01 have one hole for stripping 250 um cable down to glass fiber.
Item Successfully Added to Cart
The RS02 is designed and developed with emphasis on operability and usability where less force is required for the stripping process. Furthermore wireless link with smartphones for operational parameters adjustment. These fiber stripping tools are also compatible with stripping Fujikura latest Spider Web RibbonTM ,which consists of optical fibers (with a coating diameter of 250μm or 200 μm) fixed intermittently.
Item Successfully Added to Cart
The RS03 is designed and developed with emphasis on operability and usability where less force is required for the stripping process. Furthermore,equipped with new features such as large capacity battery for 600 stripping cycles, 6 times larger than conventional stripper, and wireless link with smartphones for operational parameters adjustment. These fiber stripping tools are also compatible with stripping Fujikura latest Spider Web RibbonTM ,which consists of optical fibers (with a coating diameter of 250μm or 200 μm) fixed intermittently.
Item Successfully Added to Cart
LTC-01 is the special tool for removing loose tube without damage to the UV acrylate coated optical fiber inside the loose tube.