Fiber Muayene ve Temizlik Ürünleri
NEOCLEAN
Ürün Kodu : J7JBBJ
NEOCLEAN-E Simple-to-Use Refillable Design The NEOCLEAN-E uses a simple one push action to quickly and effectively clean contamination from the ferrule end-face of connectors on jumpers or in adapters, reducing cleaning time. It is effective for removing oil, dust, and dirt particulates that can have a negative impact on fiber optic network performance. The replaceable cleaning cartridge can perform 750 cleanings, reducing cleaning cost. Available for SC, FC, ST, E2000, LC and MU connectors with UPC or APC polishes. NEOCLEAN-M Clean MPO/MTP® Connectors with an Easy Push Operation The NEOCLEAN-M is designed to clean MPO and MTP® multi-fiber connectors used in data centers and other high density optical networks. The NEOCLEAN-M uses a one-push operation, which simplifies cleaning of the ferrule end-face of both MPO/ MTP exposed connectors and connectors in adapters. The one-push operation advances the specially designed microfiber tape while effectively and gently cleaning the end-face of the connector. NEOCLEAN-M2 The NEOCLEAN-M2 is designed to clean MPO-16 and MTP-16 multi-fiber connectors used in data centers and other high density optical networks. The NEOCLEAN-M2 uses a one-push operation, which simplifies cleaning of the ferrule end-face of both MPO-16/ MTP-16 exposed connectors and connectors in adapters. The one-push operation advances the specially designed microfiber tape while effectively and gently cleaning the end-face of the connector.
Features
- Simple push action
- Replaceable cleaning cartridge - 750 cleaning per cartridge (NEOCLEAN-E)
- NEOCLEAN-M for MPO and MTP connectors - 600 cleans per unit
- Low cost per clean
Specification Sheet
OTDR and insertion loss test and reporting Fast, accurate Pt-to-Pt and PON verification and troubleshooting Locate faults exceeding industry or user pass/fail thresholds Visually pinpoint location of macrobends or breaks
Ürün Başarıyla Sepete Eklendi
FCP Cleaning Kits from AFL offer a complete selection of fiber optic cleaning products for field cleaning of connector endfaces in a convenient carry case. The Basic FCP2 Cleaning Kit includes FCC2 cleaning fluid, FCC3 Debris Destroyer™, One-Clicks for SC, ST, FC, LC and MU connectors, FiberWipes, and a Cletop SB.
Ürün Başarıyla Sepete Eklendi
Save time and money with a FCP1 Connector Cleaning Kit from AFL. Some of the most common issues with fiber optic networks are cause by dirty connectors. The FCP1 Connector Cleaning Kits from AFL give you the tools you need to quickly and easily clean various types of fiber optic connectors in the field. Kits include various configurations of FCC2 Connector Cleaning Fluid, CCT Connector Cleaning Tips, FiberWipes, Cletop Cartridge Cleaner, and Cletop (ACT) Cleaning Sticks. The CCT Connector Cleaning Tips are packages in small tubes and color coded for easy replacement ordering. AFL cleaning kits deliver compact, safe, easy to use reliable cleaning for all types of connector end faces including Military and Multiple Fiber Ferrule designs. AFL FCP1 Cleaning kits are perfect for the field technician or to leave at patch panels for easy access during maintenance. A wide variety of pre-stocked kits make ordering easy.
Ürün Başarıyla Sepete Eklendi
Today’s splicing equipment is fast, efficient, and requires minimal maintenance due to advances in splicing technology. However, contamination in the v-groove of the splicer is still a primary source of trouble for the splicing technician. This is especially problematic when splicing with a fixed v-groove fusion splicer. Environmental contamination, such as dust, dirt, and fiber coating debris, as well as, the silica deposits generated during the fusion process eventually find their way to the surface of the v-groove. This contamination will offset the fibers and degrade performance. To help control this problem, a disciplined cleaning regimen and specific tooling is required to ensure the splice is right the first time. To solve cleaning needs, AFL offers the Splicer V-Groove Cleaning Kit. This product integrates eight components into an affordable and effective inspection and cleaning solution for any fusion splicer. Small and lightweight, it fits easily into the Fujikura splicer transit case or it can be carried separately in its own carrying case.