Connectors & Adaptors
F
Product code : HBPATY
Following the revision of the IEC 61169-24 interface standard in response to the increasing performance demands of the broadcast television sector, Rosenberger has fundamentally revised its F-interface calibration elements. The considerably improved characteristics include an extended frequency range, from DC to 4 GHz up to DC to 6 GHz, and a doubling of mating cycles from 500 to 1000. The new 6 GHz-spectrum F series from Rosenberger comprises calibration adaptors, calibration loads, opens, shorts and loads. A new “full range” calibration adaptor is also available, addressing the extremely wide male connector pin tolerances of 0.64 mm to 1.13 mm.
- Impedance 75 Ω
- Interface according to IEC 61169-24
- Frequency range DC to 6 GHz
- Mating cycles ≥ 1000
- Screw coupling
1.0-2.3 (DIN 47297) connectors perform at 50 Ohm up to 10 GHz and are characterized by high mechanical and electrical stability. They are 40 % smaller than the 1.6-5.6 series. The connectors offer various coupling mechanisms where male types can be connected with any female type. The quick-lock/push-pull locking/coupling version allows quick installation. This series complies with CECC 22230 and DIN 47297.
Item Successfully Added to Cart
1.6-5.6 connectors perform at 75 Ohm up to 4/12 GHz and are characterized by high mechanical and electrical stability. They are mainly used for reliable transmission of high bit-rates. IInd and IIIrd generation 1.6-5.6 connectors are intermateable and feature different coupling mechanisms for allowing male types to be connected to all female types. The screw-on coupling version provides positive, familiar mating, while the quick-lock/push-pull coupling version enables quick installation. This series complies with CECC 22240 standards.
Item Successfully Added to Cart
4.1-9.5 coaxial connectors, screw-on locking, for frequencies up to 14 GHz, screw-on are robust and weatherproof. With smaller dimensions than 7-16 series solutions, making them ideal for mobile communication environments.
Item Successfully Added to Cart
The 4.3-10 series is a low PIM (Passive Intermodulation) system for frequencies up to 12 GHz for use in mobile communication applications. It is designed to meet the growing performance needs of mobile network equipment, when connecting, for example, RRUs to antennas. Features include compact connector sizes, best electrical performance, low PIM and coupling torque as well as easy installation. Offering three different coupling mechanisms – screw, quick-lock/push-pull and hand-screw – the universal jack design is mateable with all plug types.