ARAMA SONUÇLARI

The APM-102 perform all the steps required to prepare optical fibers before splicing – automatically and with high consistency. This includes stripping the fiber without degrading fiber quality, cleaning fiber with alcohol to remove coating residue, and cleaving consistently at a right angle to the fiber axis. The entire process is complete in as little as 23 seconds.

HTS-12 is designed for stripping single count of silica optical fiber by keeping the stripped fiber's glass surface free from any physical contact. In order to achieve the above condition, the HTS-12 has a precise linear slide base for stripping action. The fiber is not scuffed by the blade or any other materials when being stripped. The HTS-12 is equipped with a heater to soften the fiber coating. The HTS-12 accepts the FH-40 series and FH-100 series Fiber Holder System

AFL PowerStrip is a thermal stripper used in high strength splicing. Using the proven blade and centering design of the Schleuniger FiberStrip 7030 in addition to the fiber holder system, the AFL PowerStrip automatically centers the fiber, heats the buffer or coating, and strips the buffer at a controlled rate with perfect alignment. The fiber holder system reduces fiber handling, making this tool ideal for any production environment.

The USC-03 is Ultrasonic Cleaner designed for the cleaning of optical fiber using the FH-40, 50, 60 and 100 series of Fujikura Fiber Holder. Timer switch and Cleaning Power Volume enable to edit cleaning program. By using this equipment the fiber can be cleaned after stripping without any physical contact.

OTDR and insertion loss test and reporting Fast, accurate Pt-to-Pt and PON verification and troubleshooting Locate faults exceeding industry or user pass/fail thresholds Visually pinpoint location of macrobends or breaks

The AQ2200-112 is a light source module with high output level stability performance, it is suitable for testing the performance of passive optical components as well as calibration of optical power meters.