SEARCH RESULTS
Item Successfully Added to Cart
Item Successfully Added to Cart
Non-Adjustable Cable Stripper For Tree Wire & Spacer Cable Mid-Spans
Item Successfully Added to Cart
SS03 have three holes. The smallest hole is for stripping 250 um cable down to glass fiber. The second hole is for stripping 900 um buffer coating down to 250 um buffer coating. The biggest hole is for stripping 2-3mm fiber jacket down to 900 um buffer coating.
Item Successfully Added to Cart
Whether splicing similar fiber types or double clad LDF fibers for high power lasers, the FSM-100M+ splicers provide multiple solutions for diverse production needs. The FSM-100M+ sets the standard for fusion splicing with a multitude of new features designed to make splicing easier.
Item Successfully Added to Cart
Item Successfully Added to Cart
The CT52 is designed for cleaving silica fiber with 125μm cladding diameter, specially for its short length cleaving capability. Minimum 3mm cleave is possible by up to 900μm fiber coating, while the coating to be clamped.
Item Successfully Added to Cart
AFL’s PowerCleave combines the precision of an ultrasonic cleaver with the ease and improved fiber management of the Fujikura fiber holder system. The PowerCleave™ utilizes the tensile stress method to avoid touching or damaging the bare glass surface during cleaving, ensuring highly robust, reliable and durable splice results. The PowerCleave provides consistent flat ends even at cleave lengths as short as 3 mm. Specially designed for use with Fujikura’s specialty market splicers, this advanced cleaving system allows for more reliability and greater splicing consistency with less dependence on operator technique.
Item Successfully Added to Cart
The FP-04T/05 provide these same performance levels for 8/12 fiber ribbon respectively. . The FPS04 and FPS08 series are specially designed for optical components, where small packaging is a priority. These micro sleeves provide the known reliability of Fujikura sleeves in the smallest possible lengths. This easy and cost effective method is a great alternative to recoating. The FPS01 and FPS04 series offer a wide range of options to accommodate various coating sizes, and are manufactured in a variety of lengths. This gives great flexibility in designing optical modules.
Item Successfully Added to Cart
FSR-05 is a model which has recoating only without a proof tester. This model is appropriate for manufactures that don’t require constant proof testing after each recoat.
Item Successfully Added to Cart
FSR-06 is a model which has a recoater and proof tester with a linear clamping system. This model is appropriate for devices which conformation of reliability is required.
Item Successfully Added to Cart
The FSR-07 has a recoater and mandrel proof testing.This model is appropriate not only for recoating but also reliability proof testing as well as tension testing to failure.
Item Successfully Added to Cart
Fiber holder FH-100 series are for Fujikura fusion splicer FSM-100 resies, FSM-40F/PM and FSM-45 series. The FH-100 series are supplied with a pair.
Item Successfully Added to Cart
The Fiber holder FH-40-LT900 is exclusively designed for holding loose tube buffered fiber by Fujikura's fusion splicer,FSM-100 series, FSM-45 series, FSM-40F and FSM-40PM. The FH-40-LT900 holds the loose tube bufferd fiber by tightening a screw in the lid. The FH-40-LT900 is supplied with a pair.
Item Successfully Added to Cart
The 90R12 is a mass fusion splicer capable of splicing up to 12 fiber ribbon cables simultaneously. In previous mass fusion splicer models, the v-grooves could become dirty over time due to debris and glass deposits from splicing accumulating in the v-grooves. Which in turn, could lead to fibre offsets and high losses if they were not regularly cleaned which added to the overall process time. The 90R12 comes with a first of its kind, innovative user replaceable V-groove assembly which makes this issue a thing of the past and is supplied as standard equipment with the 90R12 kit. This new V-groove assembly can be quickly and easily fitted in the field, minimizing downtime and maximising productivity. In addition, the new V-groove design enables splicing of both conventional type 12-fiber encapsulated ribbon and SWR (Spider Web Ribbon) whilst also accommodating 250um and 200um pitch fibers. The 90R12 can also splice single fibers if required. also making use of Active Blade Management Technology, which now can connect to two CT50 cleavers simultaneously.