Konnektörler & Adaptörler

The RosenbergerHPD® universal multicore datalink connection system is optimized for data transmission up to 10 Gbps. In addition to high data performance, the centrally positioned power lane offers a power reserve of up to 100 W / 5 A – in combination with the cable shield as the ground lane. Providing data and power to complex systems through a single interface delivers several benefits including reduced costs and installation footprint. This robust, fully shielded connector is ideally suited to harsh environmental conditions, such as automotive applications, where frequent high data transmission and ampacity is required. Combined with Rosenberger’s specially designed multicore cable, featuring an optimized layout for low attenuation, virtually interference- and crosstalk-free performance is assured.

1.0-2.3 (DIN 47297) connectors perform at 50 Ohm up to 10 GHz and are characterized by high mechanical and electrical stability. They are 40 % smaller than the 1.6-5.6 series. The connectors offer various coupling mechanisms where male types can be connected with any female type. The quick-lock/push-pull locking/coupling version allows quick installation. This series complies with CECC 22230 and DIN 47297.

1.6-5.6 connectors perform at 75 Ohm up to 4/12 GHz and are characterized by high mechanical and electrical stability. They are mainly used for reliable transmission of high bit-rates. IInd and IIIrd generation 1.6-5.6 connectors are intermateable and feature different coupling mechanisms for allowing male types to be connected to all female types. The screw-on coupling version provides positive, familiar mating, while the quick-lock/push-pull coupling version enables quick installation. This series complies with CECC 22240 standards.

4.1-9.5 coaxial connectors, screw-on locking, for frequencies up to 14 GHz, screw-on are robust and weatherproof. With smaller dimensions than 7-16 series solutions, making them ideal for mobile communication environments.

The 4.3-10 series is a low PIM (Passive Intermodulation) system for frequencies up to 12 GHz for use in mobile communication applications. It is designed to meet the growing performance needs of mobile network equipment, when connecting, for example, RRUs to antennas. Features include compact connector sizes, best electrical performance, low PIM and coupling torque as well as easy installation. Offering three different coupling mechanisms – screw, quick-lock/push-pull and hand-screw – the universal jack design is mateable with all plug types.

7-16 connectors are high-quality coaxial solutions with low attenuation and intermodulation for frequencies up to 7.5 GHz. They are suitable for medium to high power transmission in outdoor applications such as mobile communications due to their high mechanical stability and excellent weather resistance.

Rosenberger has expanded its product portfolio for 100BASE-T1 connections with AMEC Ethernet connectors. In technical cooperation with Delphi/APTIV, further cost-effective high-speed Ethernet solutions for the automotive market are being developed. These robust, compact connectors deliver the high performance necessary for a range of applications including autonomous driving, driver assistance, rear seat entertainment, and LVDS & camera systems. The Delphi and Rosenberger AMEC program is 100 % compatible, ensuring the customer has a fully approved second source.

Rosenberger’s new EBC® (Efficient Board Connector) series is the ideal 5G board-to-board and board-to-module RF interconnect solution for active MIMO (Multiple Input Multiple Output) antennas and radios. Outstanding performance, low cost design and high mechanical stability make EBC® the perfect future-proof product for 5G radio interconnections. For applications up to 8 GHz, EBC® connectors fulfill the challenging requirements caused by the exponential data volumes increases in future 5G networks. Essential characteristics include extremely small dimensions, radial and axial misalignments, different holding forces, minimum board-to-board distances, and fast and cost-effective assembly design. A key mechanical design feature is the locating side which is integrated in the bullet. One side has a smooth bore, while the other has a limited-detent design. The single PCB coupler provides a consistent footprint with preloaded outer contacts for ensuring contact optimization, the push/snap-on locking mechanism allows fast and easy disconnection.

Rosenberger BNC* coaxial connectors, with a two stud bayonet locking mechanism for easy, fast and reliable connections, are mainly applied in laboratories, data systems and telecom applications.

Constantly increasing bandwidth requirements in all areas of communication and computing are placing ever greater demands on networking I/O equipment. Current edge-mount copper or fiber interfaces are at their limits even over the short distances on the PCB. Embedded parallel optics have become the solution of choice to meet these demands. High-performance routers, switches and computers have already been utilizing this technology for a decade. Parallel optic solutions are currently used in a wide range of applications: in links between nodes of supercomputers, switches in international Internet gateways as well as in data centers and central offices. Embedded opto-electrical modules and optical engines utilize parallel-optics transmitter and receiver arrays. For optimum signal integrity, thermal management, I/O consolidation and EMI/ESD, the opto-electrical modules are directly mounted close to the processors at the PCB. Parallel-optic links can complement electronic signalling in parallel lanes such as XAUI and PCIe. Using PRIZM® Light Turn®, it is possible to implement a passive plug connection between the opto-electrical modules and the fiber optic network.

Rosenberger provides a wide product range of solderless PCB connectors for challenging test & measure­ment demands and for frequencies up to 110 GHz. These PCB connectors can easily be assembled by using screws. Standard screws are included, optional screws for thicker PCBs are available on request.

Rosenberger provides floating test adaptors for a number of standard RF test interfaces. Due to their self-finding design they are suitable for automated testing processes in laboratories, e.g. of couplers, splitters, antennas and other high-frequency devices. Radial and axial misalignment ensures safe contact with the DUT – without reducing the performance. The self-finding construction makes fast and easy connecting and disconnection processes – which means significant time and cost reductions.

Rosenberger high-mating cycle products for applications requiring a robust user interface and extremely high mating cycles up to 100,000 connections. Industrial and consumer applications often require a robust user interface for the connection between a special power supply and the device. In such cases Rosenberger high-mating cycle products are the first choice and are available in standard and customized versions.

Rosenberger high-temperature connectors are generally used in engine compartments, boilers and ovens. These durable, resilient and customized connector systems are suitable for temperatures up to +450 °C. Rosenberger has the know-how of performing thermal and electrical simulations as well as processing high-temperature-proof materials such as ceramics and stainless steel. Different components including cable assemblies, housing connectors and matched antenna systems are developed in close cooperation with our customers and partners. Customized solutions are available upon request.

Rosenberger H-MTD® is a 360° fully shielded differential connector system for Ethernet applications. The newly developed system has successfully combined high-performance data transmission, of up to 15 GHz or 20 Gbps, in a compact yet robust automotive grade housing. Apart from ensuring high-bitrate data transmission, savings on installation space and weight, a further major advantage of this connector system is its modularity, providing the flexibility to support a wide range of Ethernet applications and industry protocols. Among others, this makes the Rosenberger H-MTD® highly suited for use by those designing solutions for the automotive industries.