Saha Çözümleri

The cable construction is similar for all cable sizes: Inner conductor, foam dielectric, outer conductor and outer jacket. The cables are available as standard with either a PE jacket for outdoor installations or in a flame retardant and halogen-free version to comply with indoor requirements for health and safety, IEC 60332 and CPR-EN 50575.

Rosenberger connectors are designed for ease of attachment while providing consistent industry leading performance. The connectors have excellent mechanical and environmental properties that ensure long-term durability and performance both in indoor and outdoor environments. All Rosenberger connectors are coated with a specially selected flash white bronze over silver plating. This coating is specifically selected to provide protection against oxidation while delivering exceptional performance and electrical conductivity.

Rosenberger coaxial jumpers have been designed using the many years of experience gained by Rosenberger engineers in this field. The unique knowledge of designing and manufacturing world-leading PIM testing equipment is directly reflected in the jumpers. Rosenberger jumpers have the industry-best PIM levels: -117 dBm / -160 dBc @ 2 x 20 W (typ. -120 dBm / -163 dBc @ 2 x 20 W). These excellent levels are guaranteed for every assembly that leaves the Rosenberger production facility.

The Rosenberger FTTA/PTTA Connectivity Boxes are available in standard and tailor-made designs and configurations, in low or high volumes, to meet OEM or Network Operator requirements as to efficient, reliable and easy-to-deploy connectivity boxes. Rosenberger connectivity boxes, designed and produced in-house at Rosenberger in Germany, provide the best workmanship and highest quality to ensure a long and smooth operation even in the most harsh environments.

Rosenberger offers a complete range of 50Ω coaxial cables from 1/4" to 1 5/8". The feeders provide best in-class electrical and mechanical performance: Low attenuation Low VSWR/RL CPR-rated Complete EMI shielding to minimize system interference Outstanding PIM performance High-power rating The cable construction is similar for all cable sizes: Inner conductor, foam dielectric, outer conductor and outer jacket. The cables are available as standard with either a PE jacket for outdoor installations or in a flame retardant and halogen-free version to comply with indoor requirements for health and safety, IEC 60332 and CPR-EN 50575.

Rosenberger offers connectivity solutions for concealment and streetworks integration such as bus shelters, advertising panels, street poles, lamp posts to meet requirements to extended densification of wireless networks.

Rosenberger supplies a complete range of passive components for Distributed Antennas Systems (DAS) to provide for in-building coverage up to 4.2 GHz. Rosenberger low-PIM DAS components are easy-to-install and ensure a reliable and problem-free operation.

Rosenberger offers a wide range of low-PIM transmission line devices to support high quality RF transmission line designs and deployments, and high performance TMAs to ensure high data through-put and thereby less dropped calls and improved network quality.

Rosenberger has a full range of installation material and accessories to ensure the best installation practices leading to higher quality and thereby better overall long-term system performance.

Rosenberger presents a new and innovative GPS over Fiber system for applications where coax cannot be used to route the GPS signal to base stations. With more centralized RAN and large-scale DAS applications, there are many cases where the GPS antennas are located too far from the base stations for coaxial losses to be acceptable. To overcome this issue, the GPS over Fiber system converts the RF signal to light, transmits it over the fiber, and then restores the light to the original RF signal. Working in contrast to the many systems that employ a bulky remote unit – which requires power and separate mounting space – as well as a large master unit encompassing an active GPS splitter, Rosenberger has rethought the process and designed a fiber-optic replacement for the coaxial cable. Instead of a master unit and a remote unit, the system uses an electrooptical converter (E/O converter) at the antenna and an opto-electrical converter (O/E converter) near the base station. By employing this method, the E/O converter becomes a small, compact unit that connects directly to the GPS antenna. The unit is so small that it can even fit within a 1 ½ inch pipe of the kind often used to mount GPS antennas. The O/E converter handles all alarms and is a compact unit. It can be used to power the E/O converter and can be connected to standard GPS splitters with full support for their redundancy functionality. This means that the GPS over Fiber system fully emulates the behavior of a passive copper cable and GPS antenna, allowing any device that is normally connected to the GPS antenna to maintain proper operation when connected to an O/E converter. Interconnecting the two units i.e. E/O converter to the O/E converter is a thin hybrid cable comprised of fiber and power, which means no power source is required at the GPS antenna. The individual link support for each GPS antenna allows for the flexibility of using a normal coaxial configuration and simply replacing each coax cable from a GPS antenna with an E/O converter, an O/E converter, and a hybrid cable. With a maximum hybrid cable length of 1.9 miles (3 km), this system can meet the demands of almost any installation