Optik Fiberler

FutureGuide®-BIS-B-200 ITU-T G.657.A2 (+ 200μm Coating Diameter)

Ürün Kodu : ADVVQJ

Optical fiber networks in urban areas demand more effective utilization of available space by installing high density and more fiber-count cables underground. Especially, such demand is increasing in access network. Employing our innovative fiber coating technology in FutureGuide®-BIS-B, we launch a new ITU-T G.657.A2 fiber with 200μm coating diameter named FutureGuide®-BIS-B-200. The fiber has drastically reduced coating diameter, while keeping microbend characteristics equivalent to conventional fibers. The 200μm coating diameter with tolerable microbend performance allows around 40% reduction of cable cross-section area. In addition, superior macrobending performance helps to install optical cables into narrower spaces with easy handling. This new fiber strongly contributes to not only more effective utilization of available space but also saves costs of manufacture, transportation and installation of cables.

Features

Reduced coating diameter down to 200µm with tolerable microbend performance
Superior macrobend performance complying with ITU-T G.657.A2
Zero(low)-water peak attenuation complying with ITU-T G.652.D

Characteristics

Parameters		Unit	FutureGuide^®-BIS-B-200
Coating diameter		µm	210±10(colored)
Mode Field Diameter at 1310nm		µm	8.6±0.4
Attenuation at 1310nm		dB/km	≤0.35
Attenuation at Water Peak (1383nm) after Hydrogen Aging		dB/km	≤0.35
Attenuation at 1550nm		dB/km	≤0.20
Attenuation at 1625nm		dB/km	≤0.21
Macrobending	R=15mm, 10 turns at 1550nm	dB	≤0.03
	R=15mm, 10 turns at 1625nm	dB	≤0.1
	R=10mm, 1 turn at 1550nm	dB	≤0.1
	R=10mm, 1 turn at 1625nm	dB	≤0.2
	R=7.5mm, 1 turn at 1550nm	dB	≤0.5
	R=7.5mm, 1 turn at 1625nm	dB	≤1.0
Cable Cut-off Wavelength		nm	≤1260
Chromatic Dispersion (1285-1330nm)		ps/(nm·km)	≤3.5
Chromatic Dispersion at 1550nm		ps/(nm·km)	≤18
Zero Dispersion Slope		ps/(nm²·km)	≤0.092
Zero Dispersion Wavelength		nm	1300-1324
Polarization Mode Dispersion (Free Tension Condition)		ps/√km	≤0.1
Proof Level		GPa	≥1.0

* All the data above are the characteristics of the optical fiber. Please contact us for the specification of optical cords and cables.